Answers are grounded in this paper and cite their sources.
The positive roles of H 2 -plasma treatment (HPT) have been investigated by using different treatment procedures in view of the distinctly improved passivation performance of amorphous-crystalline silicon heterojunctions (SHJs). It has been found that a hydrogenated amorphous silicon thin film and crystalline silicon (a-Si:H/c-Si) interface with a high stretching mode (HSM) is detrimental to passivation. A moderate pre-HPT introduces atomic H, which plays an effective tuning role in decreasing the interfacial HSM; unfortunately, an epitaxial layer is formed. Further improvement in passivation can be achieved in terms of increasing the HSM of a-Si:H film treated by appropriate post-HPT based on the a-Si:H thickness. The minority carrier lifetime of crystalline wafers can be improved by treated films containing a certain quantity of crystallites. The microstructure factor R and the maximum intensity of the dielectric function ε 2max have been found to be critical microstructure parameters that describe high-quality a-Si:H passivation layers, which are associated with the amorphous-to-microcrystalline transition phase induced by multi-step HPT. Finally, the open circuit voltage and conversion efficiency of the SHJ solar cell can be improved by implementing an effective HPT process.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: