Answers are grounded in this paper and cite their sources.
Effective sealing is a critical challenge in achieving the full potential of supercritical carbon dioxide (sCO2) power generation. Leakages from sCO2 cycles can reduce efficiency by up to 0.65%, underscoring the need for advanced sealing solutions. This study explores an elastohydrodynamic (EHD) seal as a promising option, designed to minimize leakage and wear under sCO2 conditions. A fluid–solid coupling model, based on finite element analysis and computational fluid dynamics, was developed and experimentally validated. Proof-of-concept tests were conducted on a 2-in. static shaft seal with pressures up to 1.2 MPa, using polytetrafluoroethylene (PTFE) as the seal material. Both simulations and experiments revealed a quadratic leakage trend: leakage initially increased with pressure, peaked at about 6 g/s, and then declined to approximately 1.5 g/s at maximum pressure. The model proved efficient, converging in just 2 s, while providing insights into leakage rates, seal deformation, clearance pressure, and stress. In addition, a modified model was provided, which converged in less than 20 s with added accuracy. A parametric analysis further demonstrated the impact of key design factors on leakage, with results aligning with physical expectations. The proposed models could serve as a valuable design tool for EHD seals.
No takes yet. Share an insight, caveat, or question.
Hassan et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: