Answers are grounded in this paper and cite their sources.
Experimental study demonstrates high radiation tolerance of diamond MOSFETs up to 10 MGy, indicating potential for extreme-radiation electronics.
Hydrogen‐terminated diamond metal‐oxide‐semiconductor field‐effect transistors with buried p + electrodes were fabricated using boron ion implantation. More than 50 devices on the same substrate were irradiated with X‐rays, and the changes in transistor characteristics were statistically analyzed up to a total dose of 10 MGy. The maximum drain current density, I D_MAX , increased from −24.58 to −32.08 mA/mm between the start of irradiation and a total dose of 3 MGy. This is attributed to oxygen vacancy trap states in the Al 2 O 3 gate oxide being gradually filled, which increased the negative fixed charge density and raised the hole density in the channel. After that, I D_MAX decreased to −27.16 mA/mm at a total dose of 10 MGy. This suggests that some structural change occurred in the Al 2 O 3 , which reduced the hole density—either by changing the amount of trapped electrons or by increasing interface trap states at the Al 2 O 3 /diamond interface. Also, threshold voltage shifts were used to quantitatively evaluate changes in the charge density inside the Al 2 O 3 . In addition, measurements using circular transmission line model showed that both the sheet resistance of the buried p + region and the specific contact resistance at the metal/p + interface remained nearly stable up to 10 MGy.
No takes yet. Share an insight, caveat, or question.
Uehara et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: