Answers are grounded in this paper and cite their sources.
A simple and time-saving method of electrodeposition was found to fabricate the superhydrophobic Zinc surface on the steel substrate. The surface morphologies and chemical compositions were characterized by using scanning electron microscope, Fourier transform infrared spectrometry and X-ray photoelectron spectroscopy. The results show that the as-prepared surfaces form micro/nano rough structures evolved from the as-prepared surfaces which have been modified by stearic acid, and exhibit good superhydrophobicity with a water contact angle of 157.2° as well as a sliding angle of 5.2°. Interestingly, the superhydrophobic Zinc surface can realize an effective reversible switching between superhydrophobicity and superhydrophilicity after being annealed and modified alternatively, with a fast the wetting switching process costing only 16 min for each cycle. Moreover, polarization curves measurements demonstrate that the superhydrophobic Zinc surface has good anticorrosion properties that can provide greater protection for the bare steel substrate. It is believed that an effective, rapid and eco-friendly approach has been invented to prepare large-area superhydrophobic surface, which shows reversible wettability switching and anticorrosion on the steel substrate for great potential applications, and easily extended to other metal substrates.
No takes yet. Share an insight, caveat, or question.
Qing et al. (2016) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: