Answers are grounded in this paper and cite their sources.
High Resolution Image Download MS PowerPoint Slide This study investigated the effect of lignin molecular weight on the performance of lignin-based wax inhibitors, where the goal was to allow for fine-tuning and optimization of this novel wax inhibitor. Softwood kraft lignin was pretreated by solvent extraction or calcination to decrease or increase its molecular weight, respectively. The pretreated and untreated lignin samples were then esterified with stearoyl chloride. Fourier-transform infrared spectroscopy (FTIR) showed the success of esterification by an increase in the C–H and C═O stretching bands, while the O–H stretch was minimized at the same time. The effect of the pretreatment on molecular weight was further confirmed by size-exclusion chromatography (SEC). The esterified lignins were tested for their wax inhibition in model waxy oils, which were made of macrocrystalline wax with different molecular weights in mineral oil. Testing showed that oils with high molecular weight waxes did not respond favorably, whereas intermediate and low molecular weight waxes responded well to the treatment, especially at low wax concentrations. Despite the molecular weight tuning, no clear correlation was found between lignin’s molecular weight and the efficiency of its stearate-ester as a wax inhibitor. Our results suggest that tailoring the lignin molecular weight appeared less suited for improvements in wax inhibition.
No takes yet. Share an insight, caveat, or question.
Ruwoldt et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: