Key result
Arterial model branch angles >90 degrees increase wall shear stress gradient via a stagnation point.
Computational modeling suggests that large arterial branch angles create stagnation points that increase wall shear stress gradients, potentially influencing local hemodynamics and vascular pathology.
Answers are grounded in this paper and cite their sources.
Large branch angles may promote vascular pathology via shear gradients in models; leaves open human translation and clinical relevance.
Three-dimensional unsteady blood flow through an artery with a small side branch was numerically analyzed using the finite-element method. Our main focus was on the model in which the angle between the trunk and the small side branch was larger than 90 deg. This arterial geometry is generally observed in a real arterial system. For this study, the arterial wall was assumed to be rigid and the non-Newtonian effect of blood was not taken into consideration. The calculation results are summarized as follows. 1) The branch angle does not have a strong effect on the flow rate through the side branch. 2) In the case of a large branch angle, the still-standing stagnation point appears near the outer wall of the small side branch. Moreover, this still-standing stagnation point has an effect of increasing the values of wall shear stress gradient (WSSG).
No takes yet. Share an insight, caveat, or question.
Nakamura et al. (1999) studied Arterial blood flow. Branch angle > 90 degrees was evaluated on Flow rate and wall shear stress gradient. A branch angle >90 degrees in an arterial model did not strongly affect flow rate but created a stagnation point that increased wall shear stress gradient.
Synapse has enriched 10 related papers. Consider them for comparative context: