Answers are grounded in this paper and cite their sources.
The cooling performance of an electric vehicle (EV) battery thermal management system (BTMS) is significantly impacted by the cooling fluids due to its widely varying thermodynamic and transport properties. The choice of appropriate working fluid becomes more crucial under high C-rate conditions due to a high rate of heat generation in the cells. Researchers have worked with different cooling fluids to improve the performance of the BTMS. However, a systematic comparative performance analysis of the BTMS using different coolants at different C-rates is not found in the literature. In this study, a 3D computational fluid dynamic (CFD) model of the BTMS is developed, consisting of four cylindrical lithium-ion cells arranged in a 2 × 2 configuration. CFD simulations of this BTMS are conducted using four different coolants, namely air, water, an alumina-water nanofluid, and an HFE7100 dielectric fluid at 2C and 5C discharge rates. Air and dielectric fluids in the BTMS directly contact the cells. However, in the water-cooled and the nanofluid-cooled BTMS, a cylindrical cell enclosure prevents direct contact between the cell and the coolant. A constant volumetric heat source is used to model the heat generation rate inside the cells. Considering the 5°C discharge rate and 298 K inlet temperature for all coolants, the maximum temperature of the battery pack is found to be 341.61 K with air cooling, 300.91 K with water cooling, 300.29 K with nanofluid, and 309.13 K for HFE7100. Therefore, water and nanofluids are found to be the best coolants for the BTMS at a high C-rate operation, while air cooling at 5°C rate can cause thermal runaway in the battery pack.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: