This is the authors' abstract. We don't add key points for this paper.
A series of thermal-responsive block copolymers, i.e., poly(methyl methacrylate)- block -poly( N -isopropylacrylamide) (PMMA- b -PNIPAAm), were successfully synthesized via successive copper(0)-mediated reversible-deactivation radical polymerization technology. Thermal properties of block copolymers with different PNIPAAm chain lengths were investigated by differential scanning calorimetery (DSC) and thermogravimetric analysis (TGA). The well-separated glass transition temperature values shown in DSC results indicate that two chemically different blocks, PNIPAAm and PMMA, are incompatible and phase-segregated. The thermal degradation results show that the thermal stability of these copolymers was improved through incorporating the PNIPAAm segments. The PMMA 120 - b -PNIPAAm 86 and PMMA 120 - b -PNIPAAm 130 maintain stability and undergo one-stage degradation when the temperature increases above 360 °C. Because of the synergistic effect of copolymer composition and copolymer film roughness, the obtained reversible thermal-responsive wettability for the resulting copolymer-modified surfaces is different, which is enhanced by incorporating more functional NIPAAm units. Specifically, the variations of the static water contact angle for the surfaces fabricated by PMMA 120 - b -PNIPAAm 40, PMMA 120 - b -PNIPAAm 54, PMMA 120 - b -PNIPAAm 86, and PMMA 120 - b -PNIPAAm 130 are 18.7, 20.4, 26.8, and 34.3°, respectively. In addition, all as-prepared surfaces present a stable reversible thermal-responsive wettability, which can be applied to coatings with temperature-controllable wettability as well as manipulation of liquids in microfluidic devices.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Li et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: