Energy/Reliability Trade-Offs in Low-Voltage ReRAM-Based Non-Volatile Flip-Flop Design

The total power budget of Ultra-Low Power (ULP) VLSI Systems-on-Chip (SoCs) is often dominated by the leakage power of embedded memories as well as status registers. On the one hand, supply voltage scaling down to the near-threshold (near- VT) or even to the subthreshold (sub- VT) domain is a commonly used, efficient technique to reduce both leakage power and active energy dissipation. On the other hand, emerging CMOS-compatible device technologies such as Resistive Memories (ReRAMs) enable non-volatile, on-chip data storage and zero-leakage sleep periods. For the first time, we present and compare ReRAM-based Non-Volatile Flip-Flop (NVFF) topologies which are optimized for low-voltage operation (including near-VTand sub-VToperation). Three low-voltage NVFF circuit topologies are proposed and evaluated in terms of energy dissipation and reliability. Using topologies with two complementary programmed ReRAM devices, Monte Carlo simulations accounting for parametric variations confirm reliable data restore operation from the ReRAM devices at a sub- VTvoltage as low as 400 mV. A topology using a single ReRAM device exhibits lower write energy, but requires a near-VTvoltage for robust read. Energy characterization is performed at nominal, near- VT, and sub- VTsupply voltages. The minimum energy point is reached for near- VTread operation with a total read+write energy of 735 fJ.