Answers are grounded in this paper and cite their sources.
This article presents an eight-channel 5–33-GHz transmit phased-array radio frequency integrated circuit (RFIC) forC-,X-,$Ku$-, and$Ka$-band SATCOM applications. The4\,\, × 2beamformer is implemented in a 90-nm SiGe HBT process. Each channel has a wideband two-stage power amplifier (PA), a phase shifter (PS), a variable gain amplifier (VGA), and a single-ended to differential (S2D) converter. The input radio frequency (RF) power is distributed to the eight channels using a two-stage lumped-element Wilkinson network and active dividers. The measured electronic gain is 24–27 dB at 5–33 GHz with 5-bit PS operation and >20 dB gain control. A peak OP1dB and OPsat of 10.8–14 dBm is achieved over the entire frequency range. The chip is then implemented in a wideband phased array using tapered-slot (Vivaldi) antennas. The 16-element phased array achieves ±60° scanning atC-,X-, and$Ku$-bands and ±30° scanning at$Ka$-band with a broadside effective isotropic radiated power (EIRP) of 16–38.5 dBm at 8–32 GHz. Quadrature phase shift keying (QPSK), 8-phase shift keying (PSK), and 16-quadrature amplitude modulation (QAM) waveform are delivered to the phased array for performance evaluation, and$C - Ka$-bands at P1dB (EIRP) operation. Application areas are$C-/X-/Ku-/Ka$-band ground terminals for satellite communications (SATCOMs).
No takes yet. Share an insight, caveat, or question.
Kazan et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: