Answers are grounded in this paper and cite their sources.
Experimental study reveals varied weathering and color changes across pigment processing methods in architectural coatings, suggesting milling improves durability without ensuring color stability.
The effect of mineral pigment processing by sedimentation (MS) and ball milling (MG) on the colorimetric response and surface deterioration under weathering of coatings formulated with polyvinyl acetate (PVAc) at 20%, 40% and 60% was comparatively evaluated; 78 coating formulations with valid records were evaluated, with five replicate specimens prepared for each formulation, resulting in 39 paired MS-MG comparisons for colorimetric analysis. The pigments were characterized by particle-size analysis, scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDS), while the coatings were evaluated using the NCS system and natural weathering exposure. The colorimetric comparison showed predominant stability between MS and MG, with 23 comparisons retaining blackness, 23 chromaticness and 22 hue. The differences depended on the pigment and PVAc concentration. During exposure, MG presented lower maximum levels of cracking, detachment and blistering than MS; however, discoloration showed a differentiated response, with higher values in MG-20% and MG-40%. The results indicate that pigment processing influences coating performance, but its effect is not uniform across all evaluated properties. MG showed a more favorable surface response under the experimental conditions studied, without demonstrating overall superiority in chromatic stability.
No takes yet. Share an insight, caveat, or question.
Carlos Guillermo Vargas Febres (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: