Answers are grounded in this paper and cite their sources.
Developing low-energy decarbonization technology is crucial for achieving large-scale CO 2 capture from industrial flue gas. During the absorption of CO 2, phase-change solvents (PCSs) can be separated into a CO 2 -rich phase and a CO 2 -lean phase. By exclusively supplying the CO 2 -rich phase to the desorber for solvent regeneration, the need for sensible heat is eliminated as a result of the reduction of the amount of solvent. However, the heat absorbed by the CO 2 -lean phase remains unrecovered. This study proposes a near-isothermal CO 2 capture technology utilizing phase-change solvents (NI-PCSs-TCC) to recover the reaction heat absorbed by the CO 2 -lean phase to compensate for regeneration heat through a heat pump system. A Solvent-Technology Matching Method (STMM) is proposed, which helps to co-optimize the solvent concentration and process operation parameters. The optimal operating range for the MEA/sulfolane/water solvent concentration and process parameters within the NI-PCSs-TCC is evaluated. NI-PCSs-TCC can achieve an energy consumption of 2.16 GJ/t CO 2 between the temperature ranges of 338.15–341.15 K for absorption and 379.15–383.15 K for desorption. This energy reduction is possible while maintaining a capture efficiency of over 90% and a lean loading of 0.2540 mol of CO 2 /mol of amine.
No takes yet. Share an insight, caveat, or question.
Chang et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: