Answers are grounded in this paper and cite their sources.
The growth of interest from the military and civil sector in unmanned aerial robotics has spurred interests on miniature flying robots (MFR). The starting point of the design process is to define an approximate target size and weight of the system, dictated generally by the final application. Two new generations of MFR, OS4 and CoaX are presented as design samples. Both the OS4 quadrotor and the CoaX helicopter represent a design example by following this process. The process starts by picking up an actuator from the database, estimating its performances with the propeller's model, computing the system total mass, power consumption, propulsion group cost and quality factors in hover and maximum thrust points. The targeted system for OS4 is about 500g in mass and 800mm in span while that of CoaX is 200g in mass and 300mm in span. In OS4, the choice of the propulsion group components was based on the iterative algorithm. The total system was tested in a free flight for validation. Hover operation validated all the electronics and the mechanics but the main limitation is the actuator's dynamics. This is due to the brushless sensorless technology used. Meanwhile, CoaX is able to hover, validating its structure, control electronics and the propulsion system. The encoder and the altitude sensor indicated that the robot takes-off as soon as the propellers reach about 145rad/s. As for the OS4, the system is equipped with a sonar-based obstacle avoidance system that is composed of four miniature ultrasound range finders in cross configuration and the altitude sonar. The robot is simulated using different environment models in different conditions. The software and the user interface are developed in MATLAB and Simulink. Currently, OS4 is being upgraded with obstacle avoidance capability with several enhancements in attitude and altitude control while CoaX helicopter are being conducted with some improvements in the electronics and mechanics design.
No takes yet. Share an insight, caveat, or question.
Bouabdallah et al. (2007) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: