Answers are grounded in this paper and cite their sources.
Different passivation techniques are investigated for reducing leakage current in small pixel (down to 9 μ m) heterostructure photodetectors designed for the short-wavelength infrared range. Process evaluation test chips were fabricated using the same process as for focal plane arrays. Arrays of small photodetectors were electrically characterized under dark conditions from 150 K to room temperature. In order to evaluate the leakage current, we studied the relation between the inverse of dynamic resistance at −20 mV and zero bias and perimeter over area P/A ratio as the pixel size is scaled down. At 150 K, leakage current arising from the perimeter dominates while bulk leakage dominates at room temperature. We find that in shortwave devices directly underfilling hybridized devices with a thermoset epoxy resin without first doing any additional passivation/protection after etching gives the lowest leakage with a surface resistance of 4.2 × 10 9 and 8.9 × 10 3 Ω cm −1 at 150 and 300 K, for −20 mV of bias voltage, respectively.
No takes yet. Share an insight, caveat, or question.
Dehzangi et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: