Answers are grounded in this paper and cite their sources.
The impact of polarization-graded AlGaN back-barrier engineering on the DC and RF performance of InAlN/GaN HEMTs is systematically investigated. The study also investigates the influence of varying indium mole fraction (x) in the InxAl1 – xN barrier layer (x = 0.75–0.83). Compared to a uniform back-barrier structure, the graded back-barrier device demonstrates enhanced DC characteristics, delivering a higher drain current density of 0.73 A/mm vs. 0.66 A/mm at VGS = –3 V and VDS = 2 V. The graded structure also exhibits an improved peak transconductance of 0.61 S/mm, representing an 10% enhancement over the 0.56 S/mm achieved by the uniform back-barrier HEMT. Owing to reduced parasitic capacitances, the gate–source capacitance decreases from ≈1.80 × 10–12 to ≈1.75 × 10–12 F/mm, while the gate–drain capacitance is lowered from ≈5.35 × 10–13 to ≈5.0 × 10–13 F/mm. These improvements directly translate into superior RF performance, with the graded back-barrier device achieving a peak cutoff frequency of 54 GHz, compared to 50 GHz for the uniform back-barrier device. Furthermore, breakdown voltage is enhanced from ≈880 to ≈960 V, indicating improved electric-field management and carrier confinement.
No takes yet. Share an insight, caveat, or question.
Gowtham et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: