Answers are grounded in this paper and cite their sources.
This paper deals with the shape control of a cantilever beam structure by using laminated piezoelectric actuators (LPAs) with a low control voltage. The shape control equation of the cantilever beam partially covered with LPAs is derived based on the constitutive relations of the elastic material and piezoelectric material and shear deformation beam theory (Timoshenko theory). The actuating forces produced by the LPAs are formulated as well. It reveals how the actuating forces depend on the number of piezoelectric layers, the thickness of piezoelectric layers and the position of the actuators. The driving voltages of the LPAs are then determined by a genetic optimization algorithm. The shape control of the cantilever beam from applying the optimal voltage to the LPAs is simulated. The simulation results show that an LPA of large layer number is able to diminish effectively the pre-deflection of the beam under a low control voltage. The voltage applied to the LPA of five layers was almost five times smaller than that of one layer. In addition, increasing the number of LPA layers can significantly improve the control performance as the acting forces of the LPA are a quadratic function of the LPA layer number. The L 2 norm of the displacement array of all nodes is diminished about 30% after optimization. Also with the same low control voltage, the LPA can obtain a better control performance than the conventional single layer piezoelectric actuator.
No takes yet. Share an insight, caveat, or question.
Yu et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: