Answers are grounded in this paper and cite their sources.
This study is concerned with the effects of process parameters such as speed, feed, tilt angle, and tool profile on mechanical and microstructural properties of stir processed, solution treated, and artificially aged AA 2014-T6. The process was carried out with an input condition at rotational and traverse feeds of 600–1400 RPM and 30–90 mm/min, respectively. Five distinct shapes of the tool pin such as triangular, hexagonal, threaded, conical, and cylindrical have been selected to carry out the process with varied tilt angle of 1°–3°. In order to exemplify the status of processed materials, optical, scanning electron microscopy and Vickers hardness measurement along with grain analysis were performed on various regions of processed cross sections. According to the results, combination of processing speed and rotational speed affects the microstructure and associated grain size and average hardness of the processed region.
No takes yet. Share an insight, caveat, or question.
John et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: