Answers are grounded in this paper and cite their sources.
The advantages of a liquid−vapor feed in a pervaporation unit are presented in comparison to a single-phase feed pervaporation unit that uses interstage heating. The comparison is based on calculations for the dehydration of isopropyl alcohol (IPA) from 13 to 1 wt % in a transverse system with hollow-fiber membranes. Because of the presence of the vapor phase, high mass- and heat-transfer coefficients in combination with low pressure drops are achieved. Vapor also supplies the heat for the evaporation and expansion of the permeating components through the membrane. Mass-transfer coefficients from the liquid to the membrane surface were measured using an electrochemical method. At low liquid superficial velocities, mass transfer increases up to 4-fold as compared to single-phase flow. Both the enhancement in mass and heat transfer to the membrane and the energy supply to the liquid result in a reduction of the required membrane area of 45%. This reduction in membrane area combined with the avoidance of interstage heat exchangers results in a marked reduction of capital costs, thus significantly expanding the application window of pervaporation.
No takes yet. Share an insight, caveat, or question.
Fontalvo et al. (2006) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: