Answers are grounded in this paper and cite their sources.
Schottky diodes have been fabricated using low-resistivity n-type free-standing GaN substrates with a reduced defect density lowly doped n-type epi-layer and an Ni/Ti/Pt/Au Schottky contact metalization. A thermionic field emission current transport mechanism was identified with a Schottky barrier height of about 0.75 eV and a diode ideality of 1.1 measured at 25 °C, both of which increase with measurement temperature up to 200 °C. The diodes were subjected to long-term testing under forward current (1.3 A cm −2 ) or reverse voltage (−3.5 V) biased storage at 300 °C in N 2 for 466 h and were also monitored under non-biased storage conditions for up to 1000 h at 350 °C and 400 °C in N 2 or at 300 °C for 1500 h in air. Except for the non-biased storage test at 400 °C, the diodes show <10% drift in ideality and barrier height during the long-term storage tests. For the 400 °C test, there is a significant increase in both barrier height and ideality over a relatively short storage period (48 h). This to be the first reported study on the long-term stability of Schottky diodes on free-standing GaN and while no catastrophic (e.g. thermal runaway) degradation of any of the diodes was observed, it is proposed that optimized thermal annealing of the Ni-based Schottky contact metalization in the temperature range 350–400 °C is necessary for stable long-term operation at high temperature.
No takes yet. Share an insight, caveat, or question.
O’Mahony et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: