Answers are grounded in this paper and cite their sources.
This study investigated a piezoelectric energy-harvesting system for a mechanical switch device. Piezoelectric ceramics of 0.4Pb(Mg1/3Nb2/3)O3–0.25PbZrO3–0.35PbTiO3 were prepared by using a conventional solid-state reaction method. Li2O, Bi2O3, and CuO additions were used as sintering aids to develop piezoelectric ceramics for low-temperature sintering. Multilayer piezoelectric ceramics with 10×10×3 mm3 sizes and with Ag–Pd inner electrodes were manufactured by using the conventional tape-casting method with the prepared powder. A prototype of a piezoelectric batteryless switch device using the multilayer ceramics was produced. It showed an output peak-to-peak voltage of 3.8 V and an output power per strike of 18 µW. The performance of the device was good enough for practical use.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2013) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: