Answers are grounded in this paper and cite their sources.
This study examines the dynamic viscoelastic properties of silica-filled solution styrene butadiene rubber (SSBR), with a focus on how filler surface modification influences hysteresis in both the transition and rubbery regions. Two composite series were prepared using octyltriethoxysilane (OTES) as a shielding agent or bis[3‑(triethoxysilyl)propyl]tetrasulfide (TESPT) as a coupling agent, allowing systematic adjustment of filler–filler and rubber–filler interactions. OTES reduced both filler agglomeration and rubber–filler adhesion, while TESPT improved interfacial bonding and filler dispersion. Swelling tests indicated a lower crosslink density in unmodified and OTES-modified vulcanizates compared to TESPT-modified ones. In the transition zone, hysteresis loss was governed primarily by the polymer matrix, with filler agglomeration reducing dissipation by increasing the effective filler volume fraction. In the rubbery state, TESPT-modified vulcanizates, having higher crosslink density, exhibited a decreasing loss tangent (tan δ) with temperature associated with the breakdown and reformation of filler agglomerates. In contrast, unmodified and OTES-modified vulcanizates showed additional dissipation from chain flow due to an incompletely crosslinked polymer matrix, resulting in either a secondary tan δ peak or a rising tan δ with temperature. This work reveals that silica surface treatment strongly influences crosslink density, a factor often overlooked when interpreting dynamic properties.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: