Answers are grounded in this paper and cite their sources.
Currently, achieving high specific capacity in Li-ion batteries while maintaining structural stability remains a critical challenge. Nickel-rich NMC is regarded as one of the most promising cathode materials for delivering high capacity; however, it suffers from surface degradation and poor electronic percolation during high-rate cycling, and its performance deteriorates due to structural degradation. Surface coating is a well-established strategy to mitigate parasitic reactions by preventing direct contact between the electrode and electrolyte. In this study, a facile, annealing-free dry coating method is introduced that uses a planetary ball mill to simultaneously passivate the surface and enhance electron transport in NMC811 cathodes. NMC811 powders were co-milled with 2 wt% Al2O3 nanoparticles and 1 wt% carbon nanotubes (CNTs) to form a protective Al 2 O 3 passivation layer and a CNT conductive additive. As a result, the specific capacity of Li-ion batteries employing the modified NMC cathode with 1% CNT and 2% Al 2 O 3 reached 94.51 mAh/g from 122.86 after 300 cycles at a high rate of 3 C, representing a 20.28% improvement in capacity retention compared to the unmodified NMC cathode. According to the results, the Al 2 O 3 –CNT modification provides a simple, rapid, and scalable strategy for fabricating stable nickel-rich cathodes under high-rate operating conditions.
No takes yet. Share an insight, caveat, or question.
Bahmaei et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: