Answers are grounded in this paper and cite their sources.
microscope. Microhardness was determined using a PMT-3 device with an MS-8.3S digital camera at a load of 0.98 N. Tribological tests were performed on a friction machine with a vertical spindle rotation axis according to the following scheme: “flat rectangular coated sample — end surface of a counter-specimen made of grade 45 steel.” Friction moments and loading forces of the samples were measured using strain gauges in continuous mode, with data displayed on a personal computer monitor. A contactless inductive sensor was used to determine the spindle speed, with data output to a digital tachometer. Results: the study data revealed that metal-ceramic coatings containing 10 wt. % of tantalum carbide nanoparticles in the deposited charge exhibited short-term durability. However, the high cost makes the use of this powder material economically impractical. Therefore, given the cost of the laser cladding process itself, the generally accepted solution is additives containing up to 4 wt. % of tantalum carbide nanoparticles, which are slightly inferior to samples with higher tantalum carbide nanoparticle content. Practical importance: the developed technology can be used for cladding the shaft journals of electric machines in subway cars and other components requiring restoration of worn surfaces. It has been demonstrated that the wear resistance of the restored surface of electric machine shaft journals can be increased by adding tantalum carbide nanoparticles to the cladding material.
No takes yet. Share an insight, caveat, or question.
Biryukov et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: