Answers are grounded in this paper and cite their sources.
The use of novel multi-core fibre (MCF) based angle sensing tape for assessing angular change on a robot arm is reported. Fibre interferometers were formed within the cores of the MCF, which was bonded to a strip of carbon fibre tape. The sensing tape’s capabilities were assessed by deploying it on a low-cost robot arm and manoeuvring its joints through a number of known angles. The principles of Fibre Segment Interferometry were used to interrogate the MCF sensing tape, with the integrated nature of the measurement allowing the angle change to be determined at each of the robot arm’s joints, independent of the path followed by the MCF. An angular resolution of 0.0012 (4.32 arcsec) over a 30 range was achieved for a quadrature bandwidth of 25 kHz at a downsampled data output rate of 3.2 kHz. The approach was also able to measure simultaneously angle changes in 3 joints which were in motion together. This technique has the scope to be retrofitted to industrial robot arms or articulated construction equipment as a cheap alternative to high performance encoders, as well as being fitted into fabric garments for biomedical applications.
No takes yet. Share an insight, caveat, or question.
Barrington et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: