Answers are grounded in this paper and cite their sources.
To find sustainable alternatives to traditional polymers, this study evaluated the potential of bamboo cellulose for the manufacture of flame-retardant filaments intended for 3D printing. Blending of five bamboo cellulose (BC)-based filament formulations was performed: S0 (C 5%, AR 95%), S1 (C 5%, AR 90%, U 0.4%, B 4%), S2 (C 4.8%, AR 86.45%, U 0.76%, B 7. 68%), S3 (C 5%, AR 82%, U 1%, B 12%) and S4 (C 5%, AR 69%, U 1%, B 25%). at 31.90C is left to stand for 30 min, 20 mL is placed inside the PET extruder and extruded through a 1 mm hole bamboo cellulose filament (BC). The results obtained using PAST 4 software revealed a normality of 95% in the data. The extruded filament titer (T) showed an average of 1.88 Ktex with no significant differences between formulations (P>0.05). Regarding combustion (C), samples S0 and S4 reached the lowest times, both 32 seconds. Regarding incandescence (I), a significant decrease in time was observed, from a maximum of 24.333 seconds in sample S0 to a minimum of 1.333 seconds in sample S4, representing a reduction of 94.521%. This behavior is attributed to the increase of urea (U) and borax (B) in the formulations. It is concluded that bamboo cellulose exhibits excellent flame-retardant properties and is suitable for processing in 3D printers.
No takes yet. Share an insight, caveat, or question.
Encalada et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: