Answers are grounded in this paper and cite their sources.
This study developed a crystallographic texture-controlled Ti–42Nb alloy via laser powder bed fusion (L-PBF), characterized its microstructures, and evaluated their contributions to mechanical properties through numerical calculations. By employing different scanning strategies in L-PBF, three types of strong textures with <001>, <011>, and <111> orientations along the building direction were successfully developed. Scanning electron microscopy and transmission electron microscopy analyses revealed the formation of columnar dendrites with slight elemental segregation and the absence of dislocation cells. Moreover, this study clarified the formation of small amounts of nanosized precipitates comprising ω and α″ phases. The texture-controlled specimens exhibited pronounced anisotropy in Young's modulus depending on crystal orientation, similar to that observed in single crystals, with a 2.1-fold difference between the <001>- and <111>-oriented specimens. Notably, the results clarified the contribution of the nanosized ω phase to a significant increase in yield strength without affecting Young's modulus. The <001>-oriented specimen exhibited reasonable yield strength (635.3 MPa) and plastic elongation (13.6%) while maintaining a low Young's modulus (40.9 GPa), demonstrating that the combination of texture control and nanosized ω phase formation is crucial for regulating the mechanical properties of metastable β-type Ti alloys. The yield strength-to-Young's modulus ratio of this alloy (15.5 × 10 −3 ) is one of the highest values among Ti alloys. These findings provide valuable insights into microstructural control using L-PBF and highlight the impact of microstructures on both elastic and plastic mechanical behavior.
No takes yet. Share an insight, caveat, or question.
Miyasawa et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: