Answers are grounded in this paper and cite their sources.
This study investigates the effects of repeated thermal cycling during welding on the microstructural transformations and microhardness of Austenitic Stainless Clad-Steel Plates (ASCSP), with a focus on the transition zone. A novel approach was employed by progressively shortening subsequent passes after initially filling the groove. Microstructural analysis using optical microscopy revealed predominantly Widmanstätten coarse grains in the Substrate Heat-Affected Zone (S-HAZ) after the fourth pass, which refined following the fifth pass due the lower heat input (9.5 kJ/cm) compared to the fourth pass (18.1 kJ/cm). The Weld Metal Transition Zone (WM-TZ) displayed a columnar and cellular structure indicative of a high solidification rate, with a planar grain solidification band near the fusion line. Successive passes from No. 4 to No. 9 influenced grain size, ferrite content, and structural regeneration, with annealing effects observed from pass No. 6 acting as a post-heat treatment. Additionally, decarburization in the S-HAZ following the ER316L deposition (pass No. 6) due to carbon diffusion into the WM-TZ, leading to progressive dark layer formation following each pass. Micro-hardness measurements indicated peak values in the carbon-rich layer and WM-TZ cellular structure, with a gradual decrease across passes due to carbide dissolution and microstructural refinement.
No takes yet. Share an insight, caveat, or question.
Ghorbel et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: