Answers are grounded in this paper and cite their sources.
As a novel surface modification technology, surface micro-texture technology can effectively improve the tribological performance of materials. In this study, four types of biomimetic micro-textures—hexagon, rhomb, sector, and annular sector—with the same depth were fabricated on the surface of SUS304 material to modify the friction pair surface. The friction and wear performance of different biomimetic micro-textures under varying loads and sliding speeds was investigated. The wear surface morphology of the micro-textures was characterized, and principal component analysis (PCA) was employed to separate the components of the coefficient of friction (COF), aiming to clarify the friction mechanism of the micro-textured surface. Finite element simulation software was used to simulate the stress distribution and wear behavior at the friction interface. The results revealed that the texture shape, load, and sliding speed all significantly influence the COF, stress distribution at the friction interface, and wear characteristics of the friction pair. Overall, the rhomb texture achieved the lowest average coefficient of friction (0.31 under 4 N/2 Hz), while the sector texture demonstrated the most stable frictional response and superior wear resistance, exhibiting the minimal wear scar depth (5.11 μm under 4 N/4 Hz) among all tested conditions. Both outperformed the hexagon and annular sector textures.
No takes yet. Share an insight, caveat, or question.
Zhang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: