Answers are grounded in this paper and cite their sources.
This work systematically investigates the effect of DC bias on the electromechanical and acoustic performance of a lead zirconate titanate (PZT) thin-film microelectromechanical system (MEMS) piezoelectric speaker array. The sound pressure level (SPL) reaches a minimum near a DC bias of approximately −4 V and increases as the bias moves toward either polarity, followed by a gradual saturation at higher bias magnitudes. To investigate the origin of this device-level behavior, the cantilever vibration displacement was measured using a laser Doppler vibrometer under a small AC excitation superimposed on different DC biases. The effective transverse piezoelectric coefficient e31was subsequently extracted using an analytical cantilever-deflection model. The extracted e31, measured displacement, and SPL exhibit closely correlated bias-dependent trends, demonstrating that the variation in acoustic output is primarily associated with the bias-dependent electromechanical response of the PZT actuator. Furthermore, the voltage–displacement characteristics were measured under different bias conditions to evaluate the electromechanical linearity of the device. Improved linearity at larger bias magnitudes is accompanied by a substantial reduction in total harmonic distortion (THD). Under the present test conditions, a DC bias of approximately 15 V provides a favorable compromise between acoustic output and distortion. These results establish an experimental relationship among DC bias, effective piezoelectric response, diaphragm displacement, SPL, and THD, and demonstrate that DC bias is an effective parameter for regulating the performance of PZT thin-film MEMS speakers.
No takes yet. Share an insight, caveat, or question.
Huang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: