Answers are grounded in this paper and cite their sources.
Graphene field-effect transistors (GFETs) with solid-state gold gate electrodes have recently been used for accurate chemical analysis in complex matrices, yet the mechanistic origin of their pH sensitivity is not fully understood. Here we show that replacing only the gate electrode transforms an otherwise pH-insensitive graphene device into a pH-sensitive one. Using the same high-quality, low-defect CVD graphene as the channel, devices gated with a conventional Ag|AgCl reference electrode exhibit negligible pH sensitivity, while gold-gated devices show a response of −62.7 mV pH−1 at a gate voltage scan rate of 0.3 V s−1. Chronoamperometry distinguishes the transient charging current from the subsequent Faradaic contribution. Cyclic voltammetry and scan-rate-dependent measurements support a coupled Faradaic mechanism. The gate leakage current scales with the square root of the gate voltage scan rate (v), whereas the Dirac-point voltage varies approximately linearly with v1/2 and has a non-zero intercept. Independent open-circuit potential (OCP) measurements confirm that the Au gate itself is pH sensitive and relaxes slowly toward a stable potential. The GFET sensitivity decreases in magnitude at lower scan rates, and extrapolation as the scan rate approaches zero brings it closer to the OCP sensitivity. The remaining difference may reflect the different electrochemical conditions at the Au gate under bias and at open circuit. These findings indicate that the apparent pH response in Au-gated GFETs originates from gate-electrode electrochemistry and is read out through field-effect modulation of the graphene channel.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: