Answers are grounded in this paper and cite their sources.
Purpose This study investigates the use of coconut shell powder (CSP), an agricultural waste material, as a sustainable reinforcement for polylactic acid (PLA) filaments used in fused filament fabrication (FFF). This study aims to improve the mechanical performance of biodegradable PLA composites while promoting the utilization of renewable waste resources. Design/methodology/approach PLA/CSP composite filaments containing 1–5 Wt.% CSP were produced through a single-screw extrusion process. Specimens were fabricated at layer heights of 0.2, 0.3 and 0.4 mm in flat and base build orientations. Mechanical behaviour was evaluated through tensile, flexural, interlaminar shear strength (ILSS) and Shore D hardness tests. Fracture morphology and interlayer bonding characteristics were examined using scanning electron microscopy (SEM). Findings The addition of CSP considerably improved the mechanical properties of the printed composites. A maximum tensile strength of 37.44 MPa was obtained at 4 Wt.% CSP with a 0.2 mm layer height in flat orientation, whereas neat PLA showed only 8.54 MPa. Flexural strength increased from 39.36 MPa for neat PLA to 106.6 MPa for the reinforced composites. Similarly, ILSS improved from 29.52 to 105.6 MPa with CSP addition. Shore D hardness also showed noticeable improvement. SEM observations revealed better interlayer adhesion and fewer voids in the CSP-filled specimens, indicating enhanced print quality and structural integrity. Originality/value This study demonstrates that CSP can be effectively incorporated into PLA filaments to develop lightweight, biodegradable and mechanically improved composites for sustainable FFF applications.
No takes yet. Share an insight, caveat, or question.
D et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: