Answers are grounded in this paper and cite their sources.
Purpose Additive manufacturing of titanium alloys enables intricate part designs, yet this comes at the cost of poor surface quality, characterized by stair-step artifacts, partially fused particles and high roughness, which ultimately limits their practical applicability. This study aims to propose a surface-state-driven post-processing framework using sustainable magnetorheological polishing (S-MRP) to address AM-induced surface defects while preserving process sustainability. Design/methodology/approach Selective laser melting (SLM) was used to fabricate Ti6Al4V titanium alloy microtubes using powder feedstock with an average particle size of 50 µm. A novel eco-friendly Sustainable Magnetorheological Polishing (S-MRP) fluid was subsequently developed and applied as a mechanical, rheology-based surface finishing technique for post-processing the additively manufactured specimens. The study establishes explicit correlations among SLM-fabricated surface characteristics, magnetorheological fluid behaviour and material removal mechanisms, thereby enabling controlled mechanical shear-based finishing without inducing thermal or chemical surface alterations. A response surface methodology (RSM) is used to optimize the interactive effects of tool rotation, workpiece rotation and tool reciprocation on surface evolution. The sustainability of the process is evaluated through life cycle assessment, comparing the developed fluid with a conventional formulation. Findings Results demonstrate that the proposed framework enables deterministic surface-state transformation, reducing surface roughness from 2.4 to 0.28 µm (87 % improvement), while ensuring uniform defect removal and significantly improved surface morphology, reduced surface roughness and establishing a controlled surface-state transformation suitable for subsequent functional applications. The S-MRP fluid exhibits improved rheological stability, magnetic responsiveness and reduced sedimentation, contributing to consistent finishing performance. In addition, a cradle-to-gate life cycle assessment confirms that the sustainable formulation reduces global warming potential and fossil resource consumption compared to conventional fluids. Originality/value This study advances additive manufacturing (AM) post-processing by integrating surface engineering, process optimization and sustainability, thereby offering a scalable pathway to enhance the functional performance of AM components. The proposed process significantly improves the surface quality of additively manufactured Ti-6Al-4V tubes and provides a promising post-processing strategy for components intended for demanding engineering applications. Application-specific qualification, however, requires further investigation.
No takes yet. Share an insight, caveat, or question.
Arora et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: