Answers are grounded in this paper and cite their sources.
The latest developments in nanocomposite technology have shown that graphene‐based nanofillers have the potential to improve the performance of epoxy systems. In the present study, 3‐aminopropyltriethoxysilane (APTES) is used to modify the surface of graphene oxide (GO). Then epoxy nanocomposites containing 0.1–1.0 wt.% GO and silanized GO (SiGO) were made by means of an optimized ultrasonic dual‐mode mixing (UDMM) technique. The synergistic effect of silanization and UDMM on the mechanical, fracture, and thermal properties of the epoxy nanocomposites was thoroughly examined. Nanocomposites reinforced with SiGO showed better performance than those reinforced with GO. The best tensile and flexural properties were reached at 0.7 wt.% SiGO, corresponding to increases of 104% in tensile strength, ~24% in tensile modulus, ~164% in flexural strength, and ~49% in flexural modulus as compared to pure epoxy. The greatest fracture toughness was achieved at 0.5 wt.% SiGO, with improvements of ~76% in fracture toughness and ~167% in fracture energy. The fracture‐surface morphology suggests that crack‐path modification and local energy‐dissipation processes may contribute to the enhanced fracture resistance. Thermal analysis showed greater thermal stability and a higher glass transition temperature. The combination of APTES functionalization and UDMM led to a better dispersion of the nanofiller and stronger interactions between the filler and the matrix, proving that SiGO can act as an effective reinforcement for high‐performance epoxy nanocomposites designed for advanced structural uses.
No takes yet. Share an insight, caveat, or question.
Kumar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: