Answers are grounded in this paper and cite their sources.
The strain-rate dependence of hydrogen-assisted damage evolution was investigated in an ultrafine-grained Fe–6Mn–2Al–1Si–0.4C medium-Mn steel using tensile testing, interrupted microstructural characterization, subsurface microscopy, and fractography. Hydrogen charging caused pronounced rate-dependent ductility loss, with relative elongation loss increasing from 24% at 1.7×10−3 s −1 to 48% at 1.7×10−4 s −1 , while the uncharged specimens showed closely comparable tensile responses. Interrupted microstructural characterization revealed similar retained-austenite fractions at both strain rates, while the lower strain rate produced greater local misorientation in both the ferrite-dominated and austenitic constituents. Hydrogen-assisted damage was preferentially associated with ferrite grain/subgrain boundaries, ferrite/austenite and ferrite/DIM interfaces, DIM regions, and cementite-related interfaces. These preferred sites remained similar at both rates, but damage features were more frequent at the lower rate. Fracture remained predominantly dimpled, with localized ferrite/cementite interfacial separation. Thus, decreasing strain rate primarily intensified hydrogen-assisted damage accumulation rather than changing DIM extent and preferred damage sites.
No takes yet. Share an insight, caveat, or question.
Moallemi et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: