Answers are grounded in this paper and cite their sources.
Re-injected produced water quality critically affects water flooding performance in low-permeability reservoirs, yet quantitative damage criteria remain lacking. This study targets under-injection wells in Daqing Oilfield by integrating water-quality analysis, core flooding, and heterogeneous-layer flow-diversion experiments. Ten water samples show that oil content, suspended solids content and median particle size significantly exceed industrial standards. Based on resistance factor ( \({F}R\) ) and residual resistance factor ( \({{F}}_{{RR}}\) ), three water-quality grades (high, medium, low) were established with corresponding thresholds for suspended solids (< 10, 10–25, > 25 mg/L), oil content (< 30, 30–200, > 200 mg/L), median particle size (< 0.4, 0.4–0.5, > 0.5 μm), and polymer concentration (< 500, 500–1000, > 1000 mg/L). Core flooding experiments further show that fresh water dilution (1:1) reduced \({F}_{{R}}\) from 64.44 to 12.22 and \({{F}}_{{RR}}\) from 16.67 to 9.00, precision filtration proved far more effective, lowering the damage index from 99.28% to 19.48%. Although plugging removers partially restored permeability, full recovery was unattainable. This work provides the first quantifiable, multi-parameter grading system and validated mitigation measures for Daqing Oilfield, going beyond previous qualitative studies. The recommended “enhanced treatment + fresh water dilution” strategy, coupled with real-time monitoring of \({F}_{{R}}\) , \({{F}}_{{RR}}\) , and injection pressure, offers a practical framework to reduce under-injection wells, ensure injection-production balance, and improve development efficiency and recovery in Type II and Type III reservoirs.
No takes yet. Share an insight, caveat, or question.
Cao et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: