Key result
Patient-specific 3D-TEE finite element models accurately reproduce tricuspid valve closure with ~0.9-mm geometric error.
Why the study?
Image-based patient-specific simulations of the tricuspid valve could support repair planning, but clinical images incompletely resolve chordal anatomy and cannot directly determine tissue properties, hindering model development.
Does a patient-specific finite element modeling framework using clinical 3D transesophageal echocardiography supplemented with ex vivo human tissue measurements accurately reproduce tricuspid valve closure geometry and mechanics in adult patients with competent tricuspid valves?
Does a patient-specific finite element modeling framework using clinical 3D transesophageal echocardiography supplemented with ex vivo human tissue measurements accurately reproduce tricuspid valve closure geometry and mechanics in adult patients with competent tricuspid valves?
Clinical 3D transesophageal echocardiography supplemented with ex vivo human tissue data enables millimeter-accurate, patient-specific finite element simulation of tricuspid valve closure, providing a foundation for computational tricuspid repair planning.
Answers are grounded in this paper and cite their sources.
Enables accurate patient-specific tricuspid modeling from 3D echocardiography; leaves open clinical translation for repair planning pending validation.
Purpose: Image-based patient-specific simulations of the tricuspid valve (TV) could support repair planning. However, clinical images incompletely resolve the chordal anatomy and cannot directly determine tissue properties, which hinders the development of such models. We developed and evaluated a framework that simulates the TV from clinical images and addresses these limitations using measurements on explanted human valves. Methods: We reconstructed ten functionally competent human TVs from 3D transesophageal echocardiography. Following manual segmentation, we automatically built finite element models with synthetic chordae and with leaflet thickness, chordal insertion density, and tissue properties informed by ex vivo human measurements. Next, we used shape matching and force-based chordal-length adjustment to simulate valve closure. We also assessed inter-observer segmentation variability and sensitivity to chordal insertion density, leaflet stiffness, leaflet thickness, and chordal size and material properties. Results: Per-valve median geometric errors were 0.61-1.13 mm relative to the morphed references and 0.55-0.95 mm relative to the image-derived surfaces. Coaptation covered 20-42% of the leaflet area, and median leaflet stresses ranged from 7.6 to 16.9 kPa. Inter-observer variability in segmentation most strongly affected coaptation area. Of the population-based inputs, insertion density and leaflet stiffness most affected geometric error. Thickness primarily affected stress, whereas chordal size and material properties had limited effects. Conclusion: Clinical echocardiography, supplemented with ex vivo human tissue data, enabled patient-specific simulation of ten human TVs. This framework provides a foundation for investigating valve mechanics and developing repair-planning tools, while sensitivity analyses identify priorities for model refinement and uncertainty assessment.
No takes yet. Share an insight, caveat, or question.
Tondi et al. (2026) studied Functionally competent tricuspid valves (n=10). Patient-specific finite element modeling of the tricuspid valve from 3D transesophageal echocardiography supplemented with ex vivo human tissue data vs. Imaged end-systolic configurations and morphed reference surfaces was evaluated on Per-valve median geometric error relative to morphed reference configuration (mm). Patient-specific finite element models from 3D echocardiography reproduced closed tricuspid valve geometry with median geometric errors of 0.61-1.13 mm and coaptation covering 20-42% of leaflet area.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: