Answers are grounded in this paper and cite their sources.
Accurate reproduction of hydrodynamic conditions in artificial gastrointestinal tract (GIT) bioreactors is a key factor governing the reliability of laboratory assessments of the nutritional value of swine feeds within the framework of alternative in vitro testing. The high viscosity and non-Newtonian shear-thinning behavior of swine digesta cause magnetic decoupling in conventional stirrers and the formation of stagnant zones, whereas mechanical agitators compromise anaerobic conditions within the vessel. This study presents a hydrodynamic rationale for the parameters of a ring-type bladed mixing device based on analytical modeling and three-dimensional mesh-free smoothed particle hydrodynamics (SPH). The simulations were conducted at the Don Engineering Center. The analytical model comprises a two-term equation for hydrodynamic resistance torque in a fluid obeying the Ostwald–de Waele power law and a quasi-two-dimensional calculation of the volumetric velocity coefficient of variation. The numerical flow model based on the implicit incompressible SPH (IISPH) algorithm was calibrated against rotational-viscometer torque by adjusting the effective viscosity of the SPH fluid. For an experimental torque of 8.56 μN·m and measured viscosity of 0.038 Pa·s, the mean simulated torque was 8.68 μN·m (a discrepancy of 1.4%) at a calibrated effective viscosity of 0.00991 Pa·s. Three representative geometric and operating configurations of the mixing device were investigated using the calibrated model. In laminar shear Regime A, the analytical resistance estimate differed from the numerical result by 15.7%, whereas in Regimes B and C, characterized by developed three-dimensional circulation, the analytical model substantially overestimated torque because bulk fluid entrainment into circumferential motion and three-dimensional flow redistribution were not accounted for. On transitioning from Regime A to Regime B, the coefficient of variation of velocity magnitudes decreased from 128.45% to 48.70%, reaching 47.83% in Regime C. The findings characterize changes in flow structure and the applicability of analytical relationships to the comparative hydrodynamic assessment of ring-type mixing devices.
No takes yet. Share an insight, caveat, or question.
Portnova et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: