Answers are grounded in this paper and cite their sources.
Rotor downwash influences crop motion during UAV spraying. Binocular high-speed photography was used to characterize the mean kinematic response of three 51-day-old cotton seedling plants at three positions beneath a quadrotor UAV: directly below a single rotor (P1), the midpoint between adjacent rotors (P2), and the fuselage center (P3). Orientation angles, accelerations, and trajectories were analyzed across the upper, middle, and lower canopy layers. Main-stem vibration amplitude decreased monotonically from apex to base. Combined peak-to-trough displacements at B/C/D were 25%/17%/8% of the apex value at P1 and 38%/16%/5% at P2; at P3, B/C retained 79%/69%, whereas D decreased to approximately 24%. Petiole trajectories were elongated ellipses with position- and layer-dependent axis ratios. Leaf motion was strongest at P2: maximum upper-canopy travel distance per cycle reached 1709.97 mm, compared with 304.38 mm at P1 and 205.35 mm at P3. Maximum middle-canopy accelerations were 12.59 m/s2 at P1 and 26.16 m/s2 at P2, approximately 1.7 times the upper- and lower-canopy values at P1 and 2.3 times the upper-canopy value at P2. At P3, maximum acceleration occurred in the upper canopy (16.35 m/s2). Overall, responses depended on rotor-relative position and canopy layer, with pronounced disturbance at P2 and in the middle canopy. The results suggest following the P2–P3 line and, where possible, the crop-row direction during spraying, potentially enhancing canopy motion and spray access to the middle and lower canopy and both leaf surfaces.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: