Answers are grounded in this paper and cite their sources.
Offshore photovoltaic steel pipe piles are susceptible to localized pitting corrosion, which reduces wall thickness and alters structural response. Overall corrosion indices, including the degree of pitting (DOP) and degree of volume loss (DOV), cannot distinguish different spatial arrangements of material loss. This study investigates the effects of pitting distribution on pile performance using controlled configurations with identical total corrosion loss. Residual cross-sectional analysis and three-dimensional pile–soil finite-element modeling are combined to evaluate vertical and lateral pile responses. Separate phase-field simulations examine the influence of stress state on pitting development. At a pit depth of 18 mm, the vertical and lateral reference loads decrease by 6.1% and 16.4%, respectively, relative to the intact pile. Across five configurations with equal corrosion loss, vertical reference loads range from 510 to 527 kN, while lateral reference loads range from 41 to 51 kN. Increasing the number of circumferential pits per row from 25 to 45 decreases the effective cross-sectional area ratio from 0.634 to 0.342. The variation in pile response is not proportional to local sectional loss, reflecting the combined effects of pitting spatial distribution and pile–soil interaction. These findings demonstrate the importance of incorporating corrosion spatial distribution into residual performance assessment and provide a basis for identifying critical cross-sections in offshore steel pile foundations.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: