Answers are grounded in this paper and cite their sources.
This paper investigates the effects of rear suspension stiffness on dynamic loading of the drive axle housing of a 1.25-ton light truck under random excitation, in accordance with ISO 8608:2016. A full-vehicle oscillation model was constructed to simulate dynamic loads over a speed range of 20–60 km/h for four road classes: B, C, D, and E. Two evaluation criteria were used: maximum dynamic load coefficient (Kdmax) and minimum dynamic load coefficient (Kdmin). The results show that road surface quality has a greater influence than speed and suspension stiffness. The traction reduction is high, while Kdmax increases from 1.05 to 2.02 (92.4%) when the road class changes from B to E at 60 km/h, and Kdmin decreases from 0.40 to 0.19 (52.5%). For road class E at 60 km/h, when the suspension stiffness increases from 0.5*C to 1.5*C, the Kdmax increases from 1.82 to 2.30 (26.4%), while the Kdmin decreases from 0.22 to 0.17 (22.7%). The worst case is for road class E with a stiffness of 1.5*C, where Kdmax = 2.30, corresponding to a dynamic load exceeding the static load by 130%, and Kdmin = 0.17, approaching the condition of loss of wheel contact with the road surface.
No takes yet. Share an insight, caveat, or question.
Van et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: