Key result
Hemodynamic evaluation of stenotic cardiac valves via the 1951 Gorlin formula requires accurate transvalvular pressure gradients, cardiac outputs, and formula validation.
Answers are grounded in this paper and cite their sources.
This review examines flaws in current practices for obtaining transvalvular gradients and cardiac outputs, as well as new data regarding the validation and potential modification of the Gorlin formula for calculating stenotic valve area.
In 1951 Gorlin and Gorlin (Am Heart J 1951;41:1-29) published their formula for calculating the area of a stenotic cardiac valve from hemodynamic data. The important concept implicit in this formula is that the hemodynamic evaluation of a stenotic valve requires that the pressure gradient across that valve be examined in light of the cardiac output passing through the orifice. The concept asserts that if an accurately obtained pressure gradient can be related to an accurate cardiac output by an accurate formula, valve area can be determined. However, recent studies have demonstrated flaws in current practices for obtaining transvalvular gradients and cardiac outputs. Further, new data are available regarding the validation and possible changes in the Gorlin formula, validation and changes that the Gorlins noted might be necessary to make. These new data concerning the three basic requirements of an accurate valve area determination are the subject of this review.
No takes yet. Share an insight, caveat, or question.
Blase Anthony Carabello (1987) conducted a review in Stenotic cardiac valves. Hemodynamic assessment using the Gorlin formula was evaluated. Hemodynamic evaluation of stenotic cardiac valves via the 1951 Gorlin formula requires accurate transvalvular pressure gradients, cardiac outputs, and formula validation.
Synapse has enriched 10 related papers. Consider them for comparative context: