Answers are grounded in this paper and cite their sources.
Selective laser melting (SLM) technology enables the precise manufacture of complex‐structured parts. However, the high laser reflectivity of CuCrZr alloy presents significant challenges to achieving high‐quality forming. This paper integrates numerical simulation with experimental investigations to optimize the SLM process parameters for the alloy and explore the underlying mechanism of defect formation. Ansys APDL software is employed to establish a model of CuCrZr alloy fabricated by SLM, and a numerical simulation‐based analytical approach for molten pool overlap is proposed. The effects of laser power and scanning speed on the relative density and defect formation of CuCrZr alloy are systematically investigated. The results demonstrate that when the laser power was 330 W and the scanning speed was 700 mm/s, the relative density of the prepared sample reached 99.78%. The microstructure of the CuCrZr alloy is predominantly composed of deformed grains; the grains exhibit a preferred orientation along the <110> direction, and a strong {110} texture is present in the microstructure. Cr elements are uniformly dispersed within the matrix.
No takes yet. Share an insight, caveat, or question.
Li et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: