Answers are grounded in this paper and cite their sources.
The deployment of sustainable aviation fuels (SAFs) and dual-use fuel strategies for aviation and ground transportation requires a detailed understanding of the hydraulic properties governing fuel injection-system behavior. This study presents a dynamic methodology for determining fuel density, bulk modulus, and speed of sound directly from rail-pressure, back-pressure, and injection-rate signals acquired during real common-rail injection events, eliminating the need for dedicated acoustic characterization equipment. Conventional diesel and Jet A1 were investigated alongside hydrotreated vegetable oil (HVO), Fischer–Tropsch synthetic paraffinic kerosene (SPK-FT), and Jet A1/HVO and Jet A1/SPK-FT blends formulated at derived cetane numbers (DCN) of 46, 51, and 56. Experiments were conducted at injection pressures between 50 and 110 MPa and fuel temperatures from 293 to 313 K. The results show that fuel density is primarily governed by composition, whereas the dynamic bulk modulus is mainly controlled by rail pressure, increasing consistently with injection pressure for all fuels and blends. Temperature systematically reduces fuel stiffness, while fuels with similar density can exhibit significantly different bulk modulus and speed-of-sound values, highlighting the importance of compressibility in defining hydraulic behavior. Fuels with higher bulk modulus values exhibited faster pressure-wave propagation, reduced hydraulic injection delay, and earlier start of injection, confirming the dominant role of fuel compressibility in injection-system response. Jet A1 blends with HVO and SPK-FT displayed intermediate acoustic and hydraulic properties between those of the corresponding neat fuels, indicating a progressive and predictable transition with blend composition. Beyond the proposed methodology, this work provides a comprehensive database of density, dynamic bulk modulus, and speed-of-sound values for diesel, Jet A1, HVO, SPK-FT, and their blends under representative common-rail operating conditions. The results offer valuable input for injection-system calibration, combustion modeling, and computational fluid dynamics (CFD) simulations while contributing to the assessment of SAFs and single-fuel-concept strategies for future low-carbon propulsion systems operating across transportation, power-generation, and aviation sectors.
No takes yet. Share an insight, caveat, or question.
González-Ruíz et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: