Answers are grounded in this paper and cite their sources.
The growing interest in small modular reactors (SMRs) has created a demand for computational methodologies capable of assessing reactor performance and safety-related behavior during the early stages of design. In this study, reactor thermal-power conditions of 60, 90, and 120 MWth were selected to investigate power-dependent thermal-hydraulic and thermomechanical responses of a thorium-based pressurized water reactor (PWR) fuel rod within a range relevant to low-power SMR concepts. Increasing heat generation and heating time resulted in progressively higher fuel temperatures and stronger mechanical responses. At 536 MW m⁻³ heat flux, the calculated fuel temperature after 10 s exceeded the 1400 °C temperature criterion adopted in the computational assessment. The coolant velocity remained approximately 0.9–1.0 m s⁻¹ over most of the modeled channel. The maximum reported cladding displacement reached approximately 2.2*10-4 m, while the von Mises stress at 10 s increased from approximately 210 MPa at 268 MW m⁻³ to 300 MPa at 536 MW m⁻³. By integrating OpenMC neutron-transport calculations with transient COMSOL Multiphysics simulations, the proposed sequential coupling methodology provides a means of evaluating how fuel driven heat flux influences local heat generation, fuel and clad temperature, coolant behavior, and structural loading. Such an approach could support the preliminary development and comparative evaluation of thorium-fueled SMR configurations, particularly by identifying highly loaded fuel rods and potentially demanding operating conditions before detailed engineering design and experimental validation.
No takes yet. Share an insight, caveat, or question.
Aryngazin et al. (2026) studied this question.
Synapse has enriched 8 closely related papers on similar clinical questions. Consider them for comparative context: