Answers are grounded in this paper and cite their sources.
This study presents an integrated experimental-numerical approach for quantifying machining-induced strength loss in composites. Multilayer composite laminates were fabricated and subjected to three distinct drilling methods: conventional drilling, waterjet cutting, and laser cutting. The drilled specimens were then subjected to tensile testing to evaluate the effect of the drilling-induced damage on their residual strength. The experimental results revealed substantial differences in failure mechanisms and tensile properties depending on the drilling method. A finite element model was developed to estimate the remaining strength. Instead of modeling distinct damage mechanisms for each drilling technique, a unified element-wise material degradation approach was employed: the damaged zones were visually measured from specimen images and assigned reduced elastic moduli and reduced Hashin strength values, both scaled proportionally to the undamaged material properties. This simple yet effective strategy consistently captures the strength loss induced by conventional drilling, waterjet, and laser cutting, and the numerical results show good agreement with experimental data. The study's findings provide valuable insights for assessing and selecting appropriate drilling processes and enhancing the structural integrity of composite materials in engineering applications.
No takes yet. Share an insight, caveat, or question.
Daneshmayeh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: