Answers are grounded in this paper and cite their sources.
Electrodeposited Zn–Mo films are promising, eco-friendly alternative to conventional Zn-based films owing to their superior corrosion resistance and mechanical stability. The influence of pH on the deposition mechanism and properties of Zn-Mo films has not been established yet. In this study, the pH was varied from 3.5 to 7.5 to evaluate its effects on deposition behaviour, structural characteristics, and corrosion performance. XRD results confirmed the formation of hcp Zn–Mo structure. Meanwhile, increasing the pH promoted lattice distortion, and a preferred orientation transition from the (100) to the (101) plane. FESEM–EDS analysis revealed an increment in the amount of Mo content in the films reaching to maximum of 43.7 wt% accompanied by enhanced oxygen incorporation indicating formation of Zn and Mo oxides/hydroxides species at higher pH. XPS survey spectra confirmed Zn, Mo, and O, while high-resolution Mo 3d spectra identified the presence of Mo 0 , Mo 4+ , and Mo 6+ . Tafel analysis demonstrated that films deposited at lower bath pH (3.5 to 5.5) exhibited better and long-term corrosion resistance with R p ranging from 9.70 to 17.33 kΩ cm 2 after 30 days of immersion, whereas EIS confirmed higher polarization resistance of the Zn-Mo thin films than zinc film and the bare substrate.
No takes yet. Share an insight, caveat, or question.
Singh et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: