Answers are grounded in this paper and cite their sources.
High-power fiber laser cutting produces localized thermal cycles that influence the hardness of wear-resistant steels. This study investigates hardness variations in 10 mm Hardox 400 plate and uses thermal analysis to interpret the experimental response. A factorial design comprising the main conditions combined laser powers of 5100–5200 W, cutting speeds of 1150–1350 mm/min and focal positions from −8 to −6 mm. The measured hardness ranged from 26.5 to 50.9 HRC, with the maximum recorded at 5150 W, 1350 mm/min, and −7 mm. For selected conditions, measured heat-affected-zone widths of 150–260 µm were compared with numerical estimates, yielding a mean absolute error of 10 µm. The highest Rockwell hardness coincided with the widest measured heat-affected zone and the highest near-edge micro-hardness, decreasing from 520 HV to 385 HV (0.2 at 0.50 mm) from the edge. These observations support a spatial association between thermal exposure and hardness response. Thermal fields provide a qualitative interpretation of localized heating and cooling. Additionally, the quadratic model showed performance (R2 = 0.423; adjusted R2 = 0.117; Q2 = −0.244), supporting exploratory interpretation rather than validated process optimization.
No takes yet. Share an insight, caveat, or question.
Dumitrascu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: