Answers are grounded in this paper and cite their sources.
The vehicle chassis frame is the primary structural component that supports all major vehicle systems and transfers static and dynamic loads during operation.The selection of an appropriate chassis cross-section significantly influences structural strength, stiffness, safety, weight, and durability.This study evaluated the structural performance of three chassis frame cross-sections, namely Rectangular Hollow Section (RHS), C-channel, and I-beam, using Nyumbu trucks as a case study.The objective was to identify the most structurally efficient cross-section under identical loading conditions.Three-dimensional chassis models were developed in SolidWorks Premium 2023 using identical dimensions and material properties (AISI 1018 mild steel).Finite Element Analysis (FEA) was performed under static and equivalent dynamic loading conditions using identical boundary conditions and mesh settings.Structural performance was evaluated based on equivalent (von Mises) stress, resultant displacement, factor of safety (FOS), and structural weight.The I-beam exhibited the best overall structural performance.Under static loading, it recorded the lowest von Mises stress (1.227 × 10⁸ N/m²), the smallest displacement (2.9 mm), and the highest FOS (3.0).Under the equivalent dynamic loading case, the I-beam again demonstrated superior performance with the lowest stress (1.84 × 10⁸ N/m²), lowest displacement (4.4 mm), and FOS of 2.0.The RHS exhibited satisfactory static performance but its FOS decreased to 0.9 under the equivalent dynamic case.The C-channel produced the highest stresses and displacements, with FOS values below unity under both loading conditions.The study concludes that the I-beam provides the most favorable simulated combination of strength, stiffness, and safety within the investigated configurations.
No takes yet. Share an insight, caveat, or question.
Seleman et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: