Answers are grounded in this paper and cite their sources.
Fiber bridging and matrix fracture jointly govern tensile cracking in engineered cementitious composites (ECC), and the modeling scale depends on the response of interest. This structured narrative review uses topic searches and citation tracking to compare macroscale, Meso-II and Meso-I models. The comparison covers numerical method, spatial dimension, fiber representation, material variability, crack prediction and experimental evaluation. At the macroscale, a tensile damage model predicted a static peak load of 67.5 kN and a corresponding midspan deflection of 20.4 mm for a bridge deck link slab, compared with 67.1 kN and 21.1 mm measured. At Meso-II, a stochastic cohesive crack model linked collective bridging to multiple cracking and, with variable sectional fiber content, predicted a mean ultimate tensile strain of 1.78%, compared with 1.86% measured. At Meso-I, a three-dimensional finite element model resolved load transfer by individual fibers and predicted a mean crack width of 128 μm in direct tension, compared with 129 ± 12 μm measured. These comparisons identify the strengths and limitations of each scale, guide model selection for structural analysis, crack control and fiber–matrix interface design and establish priorities for further research.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: