Answers are grounded in this paper and cite their sources.
This study comparatively investigated the effects of disodium octaborate tetrahydrate (DOT) and silicate-modified resin impregnation systems on the physical and mechanical properties of fresh and naturally aged (historical) Crimean pine (Pinus nigra Arnold) and Scots pine (Pinus sylvestris L.). Wood specimens were treated with aqueous DOT solutions at concentrations of 5%, 10%, and 15% (w/v), either alone or in combination with silicate-modified resin. Air-dry density, modulus of rupture (MOR), modulus of elasticity (MOE), and compression strength parallel to the grain were evaluated. Statistical analyses revealed significant effects of wood type and impregnation formulation on the investigated properties (p < 0.001). Historical pine specimens generally exhibited lower bending and compressive strength than fresh specimens, whereas historical Crimean pine retained a relatively high MOE (10,290.97 N/mm2) compared with fresh Crimean pine (9809.54 N/mm2). Impregnation treatments increased mean air-dry density from 0.496 g/cm3 in untreated specimens to 0.600 g/cm3 with R-DOT 15, corresponding to an increase of approximately 21.0%. Resin-containing treatments significantly improved bending performance compared with untreated and DOT-only specimens. The R-DOT 5 formulation exhibited the highest numerical MOR (109.56 N/mm2) and MOE (12,427.25 N/mm2), representing increases of 44.9% and 41.8%, respectively, compared with untreated controls. However, no statistically significant differences were observed among resin-containing formulations, indicating that DOT addition did not provide a distinguishable additional improvement in bending performance compared with resin treatment alone. The highest mean compression strength was also recorded for R-DOT 5 (41.44 N/mm2), corresponding to a 20.6% increase over the untreated control (34.36 N/mm2). A significant interaction between wood type and impregnation formulation was observed for compression strength (p = 0.021), indicating species-dependent treatment responses. Overall, the findings demonstrate the potential of silicate-modified resin-based treatments to improve the mechanical performance of fresh and historical pine wood, providing experimental evidence relevant to developing wood-strengthening strategies for architectural conservation.
No takes yet. Share an insight, caveat, or question.
Karagoz et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: